Poistomyynnissä…

ProVari™ Mini V2.5 !

Modi käyttää 18350 akkua, tai lisävarusteena olevalla jatkopalalla 18500 akkua.

Vaihdettava-jännitteisten modien mersu. Amerikkalaista laatua.

Vuoden takuu. Käyttöohje saatavilla Valmistajan sivulta

Ominaisuuksia:
- Jännitteensäätö 2,9-6 volttia
- Näyttö
- Valaistu nappi toimii myös alhaisen varaustason varoittimena.
- On/Off toiminto.
- 16 sekunnin aikakatkaisu vapotukseen.
- Väärinpäin asennetun akun suojaus.
- Akun varauksen tarkkailu, sammuttaa laitteen kun akku liian tyhjä.
- Oikosulkusuojaus, ampeerirajoitus 3,5 ampeeria.
- Ylikuumenemis-suoja.
- Huippulaadukas kytkin.
- Materiaali ruostumatonta terästä.
- Laser-etsattu Logo
- Valmistettu huippulaadukkaista komponenteista.
- Mittaa akun jännitteen kuormassa tai ilman (tulittaa kun ato kiinni)
- Made in USA

Hinta
50,00 €
Saatavuus
Tilapäisesti loppunut

Malli:

Tilapäisesti loppunut

Tilapäisesti loppunut

Tilapäisesti loppunut

Satin Black

Satin Black

  • Satin Black
  • Satin Black
  • Satin Silver
  • Metallic Bronze
  • Polished Stainless Steel
  • Satin white

Errors – There are a number of safety monitors built into the ProVari and its always checking for problems If a problem is detected the display will show a two digit error checking for problems
.
If a problem is detected the display will show a two digit error code for 4 seconds alerting you of a problem. The following are the error codes:
• E1 – Short Circuit / Shorted Atomizer – If this error appears, remove the atomizer and replace with a different one or lower your voltage settings The ProVari will automatically reset when the problem is fixed or lower your voltage settings. The ProVari will automatically reset when the problem is fixed
.
• E2 – Current Limit Exceeded – If this error appears, lower the voltage on the device or use a higher resistance atomizer. Once the problem has been fixed, the ProVari will reset itself.
• E3 – Thermal Monitor – If this error appears, let the device cool off for several minutes before using again.
• E4 – Input Voltage to DC/DC conv erter error – Contact ProVape.
• E5 – Overvoltage Detected – Contact ProVape.
• E6 – Microprocessor has a problem – Contact ProVape
• E6 – Microprocessor has a problem – Contact ProVape
• E7 – Voltage output detected when there should be none – This can be caused by a converter fault or by an open atomizer. Only contact ProVape if you know the atomizer is good and the problem persists.
• E8 – Converter has detected a fault – Contact ProVape is this persists.

If you’re tired of good vapor at the start of a new battery and weak vapor at the end, then the ProVari variable voltage e-cig is for you! The ProVari is a microprocessor controlled variable voltage e-cig that lets you adjust the voltage in seconds with just a few presses of a button.

Now you can select the perfect settings for your atomizer, cartomizer and e-liquid!

Our variable voltage ecig has a regulated output which keeps your selected voltage the same with each puff regardless of your remaining battery power.
As the battery drains, the ProVari ecig will keep the voltage consistent giving you the perfect vapor throughout the day.
We recommend only using AW IMR high drain batteries in your ProVari variable voltage ecig.

The ProVari can be adjusted from 2.9 – 6.0 volts in 0.1 volt increments.

The ProVari’s variable voltage settings include:

2.9, 3.0, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9, 5.0, 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, 5.7, 5.8, 5.9 and 6.0 volts.

We recommend only using AW IMR high drain batteries in your ProVari

TAKUUEHDOT:

PRODUCT WARRANTY
This warranty is extended only to the original end-use purchaser or the person receiving the product as a gift, and shall not be extended to any other person or transferee.
What is covered/For how long:

The ProVape-1’s electronics are covered by our lifetime warranty from the date of purchase by the original end-use purchaser. ProVape warrants that this product, when delivered to you in new condition in the original packaging and used under normal conditions is free from any defects in manufacturing, material and workmanship.
The ProVari’s electronics are covered by our 1-Year warranty from the date of purchase by the original end-use purchaser. ProVape warrants that this product, when delivered to you in new condition in the original packaging and used under normal conditions is free from any defects in manufacturing, material and workmanship.
What is not covered:
This warranty does not cover the atomizer, batteries, charger, tips or any other accessories, only the device itself.
The warranty does not cover improper or unreasonable use; failure to follow operating instructions; accidents, excess moisture, lightning, power surges, connections to improper voltage supply/batteries, unauthorized alteration or modifications to the original device including refinishing or etching; loss of or damage to the vaporizer or its internal components. Cross threading the end caps is not covered. Dropping the device and causing internal damage is not covered. Using improper batteries or magnets on your batteries will void the warranty. Taking the device apart and removing the circuit board can cause damage to the internal components and this will void the warranty.
What we will do:
During the warranty period, we will repair or replace free of charge, any defective parts within a reasonable period of time.
What you must do to obtain Warranty Service:
1. Contact ProVape via e-mail for specific return and shipping instructions.

2. Label and ship the product, freight prepaid, to the address posted on our website. Include a copy of your original order and explanation of the problem or reason for return with the return. Packages not bearing a return authorization number, where required, will be refused.
Other conditions:
THE PROVISIONS OF THIS WARRANTY ARE IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESSED OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PROVAPE, INC’S MAXIMUM LIABILITY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT. IN NO EVENT SHALL PROVAPE BE LIABLE FOR LOSS OF, DAMAGE TO OR FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES HOWSOEVER CAUSED INCLUDING WITHOUT LIMITATION THE REPLACEMENT OF EQUIPMENT AND PROPERTY, WITH YOUR PROVAPE PRODUCT.

Standard Service Repair Costs
Replace Window and screws- $10.00
Replace Tube – $40.00
Replace Circuit Board – $65.00
Upgrade to V2 – $20.00
Replace plastic pushbutton – $5.00
Repairs to the circuit board – $25.00
Cleaning – $10.00
Replace top cap – $15.00
Broken Cartomizer Service – $10.00
Return shipping within the USA – $5.00
Return shipping International ~$39.00

Tämän tuotteen ostaneet ostivat myös…

Purple Efest IMR18500 1000mAh 15A - button top

18500 akku, AW - EFest

Alkaen 7,50

Varastossa

Lisää ostoskoriin

Silica wick - eri vahvuuksia

4,00

Tilapäisesti loppunut

Lisää ostoskoriin
Boge Standard

Boge 5kpl , Slotattu - UUTUUS

6,00

Tilapäisesti loppunut

Lisää ostoskoriin
eGo Winder

SMOK eGo Winder

Alkaen 28,00

Tilapäisesti loppunut

Lisää ostoskoriin

Stainless Steel Mesh, A5 arkki

7,00

Vaihtelee mallin mukaan

Lisää ostoskoriin
Efest zip case 3x18650 akuille

Akkukotelo, eri malleja

Alkaen 1,50

Varastossa

Lisää ostoskoriin

Kanger Subtank vaihtovastus

Alkaen 4,00

Vaihtelee mallin mukaan

Lisää ostoskoriin